• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Mjhitman

  1. M

    How did I mess this up?!!! Removed the frunk to do some work, ran the Spyder with it off, & now have all sorts of warnings & Limp Home Mode!! Help?!

    Yes, that's what I did exactly. That's when the brake failure came on. Thanks for the good suggestion. I'll let you know what I find out.
  2. M

    How did I mess this up?!!! Removed the frunk to do some work, ran the Spyder with it off, & now have all sorts of warnings & Limp Home Mode!! Help?!

    Over the Holiday break I finally got around to working on my 2016 RTL. Installing the Baja Ron Shock Adjusters, Oil Change, New Bumpskid, etc. After lifting the bike and placing it on stands and blocks. I proceeded to remove the Frunk to facilitate the shock adjuster install and to clean my...
  3. M

    2016 Runs hot for a while - what would cause this??

    Well, the baby needed burping! After looking over all of the responses and following the 30 minute elevated front end high idle procedure, it seems to be corrected. Yes the BRP coolant is 50/50 "DO NOT ADD WATER" printed on the bottles. Got a few bubbles during the procedure and came up to...
  4. M

    2016 Runs hot for a while - what would cause this??

    2016 RTL seems to run hotter than midway for a while, then after some amount of time will settle in and stay in the middle of the range on the temp gauge. I have flushed all coolants and changed oil & filter with the Lamonster oil change kit. Running pure BRP coolant and still seems to run hot...
  5. M

    What's needed to fix Turn Signal Hyper Flash because of trailer?

    I used the plug and play wiring harness from Can Am Spyder Accessories. There are four pins. When I plug the leader into the plug on the bike with no trailer the hyper flash continues. Unplug the leader from the bike no hyper flash. I installed a 4 pin round female receptacle in the bottom of...
  6. M

    What's needed to fix Turn Signal Hyper Flash because of trailer?

    I keep on getting the hyper flash of my turn signals on my 2016 RTL. I have used the Lamonster Garage reset technique and it will work. But as soon as I shut it off and restart it and rid the bike the hyper flash keeps coming back. Yes, I have a trailer connection and I know that this is what...
  7. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    THANK YOU! My point exactly!
  8. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    THANK YOU! My point exactly!
  9. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    That's good to hear, I have 14awg run so far, so it should be good. Another thing is, what is the link for the relay and diode you recommend? I've been looking out there are so many choices. Thanks!
  10. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    What is the wire size you used for the bike and trailer?
  11. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    Ok, so no isolator or relay? I like your system the best!
  12. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    Looking at your diagram, was wondering what type of charger you are using. I see it is powered by 12v starting battery.
  13. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    Thank you Bert for your concise explanation of how to wire what I'm trying to accomplish. I like your idea of putting the isolator in the trailer before the Aux battery. What type of isolator are you talking about? Do you have a link to what you mean?
  14. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    The charging system for the batteries should be enough. Bike starting battery through the trailer connection to the trailer battery. Thank you!
  15. M

    Will Charging the Camper's Battery off my Spyder overload the Alternator

    Thank you for your post on my question. Would you know of any type isolator with the 1 way current flow you would recommend?
See more
Back
Top