• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. thereverend

    BRP published a Quality Bulletin - "Canyon Saddle Bags Watertightness Improvement"

    (Always connect the vehicle to the BRP diagnostic software (BUDS) to ensure all required updates are performed. Only vehicles displaying the symptoms outlined in this bulletin are eligible for repair. Claims on vehicles without these symptoms will be denied.) This is what my dealership said in...
  2. thereverend

    Anyone know how to Reset the Fuel gauge on the Canyon display?

    thank you
  3. thereverend

    Anyone know where I can purchase Rocker Switches to match the existing Canyon Red Rock switches?

    Thanks, I ordered some
  4. thereverend

    Anyone know where I can purchase Rocker Switches to match the existing Canyon Red Rock switches?

    Thank you sir
  5. thereverend

    Anyone know where I can purchase Rocker Switches to match the existing Canyon Red Rock switches?

    Does anyone know where I can purchase some "Off/On" rocker switches for the Red Rock to match the existing?
  6. thereverend

    Anyone know how to Reset the Fuel gauge on the Canyon display?

    Thank you sir.
  7. thereverend

    Anyone know how to Reset the Fuel gauge on the Canyon display?

    Does anybody know how to reset the fuel gauge on the Canyon display?
  8. thereverend

    Where can I purchase the keyed Power Port Adapters for my Canyon?

    Where can I purchase the "keyed" power ports adapters? I want to be able to do my own wiring with a plug-n-play situation.
  9. thereverend

    What did you do to your Spyder today?

    Nice! I have added a Chigee AIO-6 system to my 2015 RT, works well especially the blind spot detection from the rear. www.chigee.com
  10. thereverend

    Anyone tried replacing bad foam on inside of tupperware/panels? What's best to use?

    I just ordered some, based on your post
  11. thereverend

    Anyone installed one of these Chigee Aio-5 Lite nav systems?

    I installed the Chigee AIO-6 LTE system just yesterday, haven't had time to try it out.
  12. thereverend

    I cannot get the T25 screw on top RH of the Windscreen bracket to loosen - any suggestions?

    Thanks for all the replies, I used a left-handed thread e-z out, after I drilled a small pilot hole in the bolt head
  13. thereverend

    I cannot get the T25 screw on top RH of the Windscreen bracket to loosen - any suggestions?

    I bought a new windshield from Lamonster Garage, and I went to install it, and I cannot get the T25 screw on the right hand top of the bracket to loosen, any suggestions will be helpful, the left-hand side was no problem. It looks to be a stainless-steel screw.
  14. thereverend

    What experiences have you had with Lithium Batteries?

    I just installed the npl20 in my 2015 RT, I believe this is the way to go.
  15. thereverend

    2015 RT won't start after Tri-axis bar swap - any ideas?

    Mike, I took the battery out, (supposed to be new) charged up my old battery and reinstalled it, looked for fault codes, NONE, hit start button, and it fired up!! Thanks for your input brother.
  16. thereverend

    2015 RT won't start after Tri-axis bar swap - any ideas?

    I have a 2015 RT, I just did a Tri axis handlebar swap, hooking all the electrical plugs back in, and the battery, turn key on, all dash lights light up, when I hit the starter switch all I get is a clicking sound, not hearing the starter engaging. I thought it might be the battery, so I charged...
  17. thereverend

    Tri-Axis handlebar install? How hard is it?

    thank you
  18. thereverend

    Tri-Axis handlebar install? How hard is it?

    Do you remember how much time it took? I plan on doimg the removal of all the skins then the upper fairing then reinstall and do the tri axis bars. Wondering how much time might be involved.
  19. thereverend

    Where can I get instructions for BUDS2 software?

    YouTube has a few videos on it.
  20. thereverend

    Tri-Axis handlebar install? How hard is it?

    Anything I need to know about the heated grips on the triAxis install?
Back
Top