• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Hogmonster

    2021 Can Am Spyder F3-S - anyone know the Rear Brake Puck dimensions?

    Thanks to @TheMariner and @BajaRon for your helpful replies, I am over with the Spyder again tomorrow, I'll take some thin nosed pliers with me. The caliper is off, old pads removed, cleaned, and ready for the pads, as mentioned I neglected to check piston/puck size. In peoples opinion should...
  2. Hogmonster

    2021 Can Am Spyder F3-S - anyone know the Rear Brake Puck dimensions?

    Hi, I am in the process of fitting new rear pads to my 2021 Can Am Spyder F3-S, I know the piston winds back clockwise. I have a few different car sizes at home (my Spyder lives somewhere else) I was wondering if anyone knows the dimensions of the puck to wind the piston back, diameter, pin...
  3. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Hi TheMariner Thank you for your post @TheMariner, that is very encouraging to know someone has carried out the mod I'm thinking about doing. I have managed to locate an adjuster which is R/H & L/H thread, so I shall go with that idea. I have taps to suit both threads. Like your picture, I will...
  4. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Thank you that is very useful information. Andrew...
  5. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Thank you for the info & comments that is very helpful and good to know. Andrew...
  6. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Hi, I am Andrew from the UK and have a 2021 F3-S which I bought new. I have very recently purchased an MTV handlebar brake conversion kit as I have disabilities. I have a background as a motorcycle mechanic so I feel I am competent to fit it. My footrest is on position 5, to fit the brake pedal...
  7. Hogmonster

    2021 F3-S - is new Thread Lock necessary when refitting body panels?

    Hi Iso, Thanks for your reply, I too share a lot of your traits; 6 sided sockets for sure, Vernier calipers (not digital), & a big �� up on the torque wrench; but I had to check on the Loctite - I use 242, I believe 243 is the "new improved" version? Thanks again, Andrew...
  8. Hogmonster

    2021 F3-S - is new Thread Lock necessary when refitting body panels?

    Hi all, my fellow Spyder riders. I have been removing body panels from my F3 to clean it over winter, I have noticed that BRP seem to thread lock everything, is it necessary to apply new thread lock to the screws attaching the body panels when refitting them and also after removing some a few...
  9. Hogmonster

    Upgrade LED Turn Signal Bulbs won't illuminate - any ideas?

    "N0 Plate" is a shortened version of "Number Plate" in the UK. Andrew...
  10. Hogmonster

    Upgrade LED Turn Signal Bulbs won't illuminate - any ideas?

    Thanks Guys All Sorted. Out. Hi Doug thank you for your help regarding the Canbus suggestion and all the other people who chipped in. I ordered some Canbus error free LED 581 Py21w bulbs with fitted resistors to stop the hyper flash, they did too, I also ordered some 380 Bay15d 21/5w CanBus...
  11. Hogmonster

    Upgrade LED Turn Signal Bulbs won't illuminate - any ideas?

    Hi, Guys thank you so much to everyone for your interest and support on this subject, I didn’t realise the Spyder used the Canbus system, I will check the polarity of the bulb holders with my multimeter that can’t lie, if they are the wrong way round I will dig deeper. I will return the bulbs I...
  12. Hogmonster

    Upgrade LED Turn Signal Bulbs won't illuminate - any ideas?

    Hello and greetings from the UK. I have tried searching the database but I couldn't find the information I need. I am looking to upgrade the std 21w winker bulbs that are fitted to my UK spec F3-S to LED. I bought the correct fitting bulbs with offset pins see link below, I fitted the bulbs...
  13. Hogmonster

    Hey Ya'll We Got A New Member! Lets welcome Hogmonster to SL

    Hi to you all, I'd like to introduce myself, I live in the UK. I got my Graphite Grey F3-S in May 2022, (2021 model) she was brand new when I took possession of her, I put a deposit on her in October 21, the agreement with the dealer was she would stay with them as she was due to go on their...
Back
Top