• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. B

    2016 RT Limited - lessons learned while adjusting the side box cable

    try the JB WEld UV harden super Glue
  2. B

    I get a Leg pain after riding the RT for more than half an hour - anyone else? Any solutions?

    I'm working on a set of "floating floorboards" so I can stretch out....
  3. B

    What did you do to your Spyder today?

    My seat had damage at the point.... I found an upholstery guy who liked my BBQ, he did the repair for a PORK BUTT!! -
  4. B

    2016 RT Limited - lessons learned while adjusting the side box cable

    When removing the rear tupperware or valance, be gentle, those tabs break easily. Super glue won't get it, JB Weld almost.... then I tried the JB Weld Super Glue with UV Light hardener - GAME CHANGER! I also used the method of a piece of Styrofoam sheet soaked in super glue then the UV Light to...
  5. B

    Broken top box arm and tight seat spacers on a 2016 RT Limited - any ideas/assist?

    didn't see it BUT looked mostly at ends... don't want to remove rear panel again, will try again if latch mech gets harder to operate.
  6. B

    Broken top box arm and tight seat spacers on a 2016 RT Limited - any ideas/assist?

    Done deal - epoxy failed, so used a rib of 1/2"X1/8" extruded aluminum. I left it loose till remounted, then tightened the nuts to help with the alignment, then Locktite... To prevent the parts from spreading if the bar flexe,s I joined each side with just a scrap of aluminum on each side with a...
  7. B

    Broken top box arm and tight seat spacers on a 2016 RT Limited - any ideas/assist?

    A better look tells me that the arm IS part of the inner cover... just me and the interwebs, no Can Am dealer for a couple hundred miles... going for the Epoxy and melt in a couple hot wires as well. - Thanx Yea had another look this AM, and I saw the arm WAS a part of the inner cover. Think...
  8. B

    Broken top box arm and tight seat spacers on a 2016 RT Limited - any ideas/assist?

    New to me 2016 RT Limited - the right arm on the rear top box lid is broken. Diagrams aren't clear to me, seems like a fix for me would be a good epoxy and then drill and pin it, or epoxy a strip on the edge, See pic.... When removing the seat, those spacers for the rear bolt seem a little...
  9. B

    Welcome, Baird4444

    Glad to be here. Long time touring rider turning 70 this week so decided this might be the way.... I have been getting 10 to 15k miles a year on my Honda ST1300 but arthritic knees are getting weaker. Hoping this 2016 RT Limited is the answer. I already miss leaning in the turn but "This is the...
Back
Top