2023 F3L SES Front Sprocket BUSTED! Has anyone else with a "newer" Spyder had a sprocket issue?

[PURPLE ON THREE]

Cannot believe this is an issue after the recall on the older models! I had my front sprocket replaced three times on my 2018 F3 and then BRP did the recall. My dealer/mechanic was always ahead of the game and I never broke down with a bad sprocket... until yesterday on I-485 Charlotte!

What a TERRIBLE sound, no warning, nothing! I was cruising along and tried to give it throttle to pass and got nothing but a terrible grinding sound!

This is my 2023 F3L with 27,500 miles. Luckily, it is under warranty until the end of this month, as I purchased it April 30, 2024. Guess who bought their extended warranty today???

BRP Roadside Assist contacted a tow truck and my Spyder was towed to Ride Now Powersports in Concord, NC. Got there at closing time but they knew we were coming. Of course they don't have a front sprocket or bolt in stock so TommyG went off on his Harley to Iron Horse Motorcycles in Monroe, NC this afternoon to get the parts and deliver them to Ride Now so we can get it fixed and get back on the road.

We live in western PA and are riding to Florida... at least that is the plan. Has anyone else with a "newer" Spyder had a sprocket issue? The dealer said they could get us back on the road in a jiffy because they have new Spyders for sale, lol. No thank you... do you know how long it takes to put swarovski crystals on a Spyder one small crystal at a time? lol

 

[bikerchris1270]

I’m thinking the last tech that installed the failed pulley did not use the specified Loctite on the splines of the output shaft.

 

[PURPLE ON THREE]

I’m thinking the last tech that installed the failed pulley did not use the specified Loctite on the splines of the output shaft.

The sprocket on my 2023 was never replaced - there was no recall on that model year. It's OEM. It should not be an issue. BRP put it together at the factory. I was referring to the older model Spyders (like my 2018 that had so many sprocket issues). I'm disappointed to have to deal with this issue at all on the 2023.

 

[Snowbelt Spyder]

The sprocket on my 2023 was never replaced - there was no recall on that model year. It's OEM. It should not be an issue. BRP put it together at the factory. I was referring to the older model Spyders (like my 2018 that had so many sprocket issues). I'm disappointed to have to deal with this issue at all on the 2023.

Since the recall period, I can't remember a single case that has been reported on here, of a catastrophic sprocket failure on a new machine... until now. So, I'm feeling that this is one of those manufacturing or assembly defects that just come along once in a while. Not a fleet problem. The very reason that we have warranties, I suppose. At this point, what I would be concerned about is that this "emergency" repair is performed properly at this shop. To Chris's point, even though this was a factory installed sprocket, the 2023 F3 shop manual specifies Loctite 609 to be used. it doesn't say, "or equivalent" (what-ever that might be, anyway). Loctite 609 has a full cure time specified as 24 hours. A conversation that I think you would want to have with the maintenance folks at this shop. Don't rush things. Hope that the rest of your trip is uneventful as you were hoping.

 

[Woodaddict]

This Ridenow is my dealership go to. I only go there for NC inspections. 2 yrs ago while there for inspection, they said sprocket recall came up to do. So I stayed extra to have done. They never said anything about a 24 hr cure. Maybe they didn't know or didn't care. I knew about it, but had to get back home to go to work, so I didn't get on the power band at all, just more easy on way home for 25 miles. So in the 2 yrs after, no problems with my 2015 RTL

 

[PURPLE ON THREE]

Since the recall period, I can't remember a single case that has been reported on here, of a catastrophic sprocket failure on a new machine... until now. So, I'm feeling that this is one of those manufacturing or assembly defects that just come along once in a while. Not a fleet problem. The very reason that we have warranties, I suppose. At this point, what I would be concerned about is that this "emergency" repair is performed properly at this shop. To Chris's point, even though this was a factory installed sprocket, the 2023 F3 shop manual specifies Loctite 609 to be used. it doesn't say, "or equivalent" (what-ever that might be, anyway). Loctite 609 has a full cure time specified as 24 hours. A conversation that I think you would want to have with the maintenance folks at this shop. Don't rush things. Hope that the rest of your trip is uneventful as you were hoping.

Thank you for sharing that... Gosh, I hate to be the guinea pig sometimes. Thank you for sharing your knowledge. So here's a question, could it be possible that there was an "old style" sprocket installed? I hope I get to see the sprocket and I know my dealer/mechanic in Hanover, PA would like to see it as well...

This Ridenow is my dealership go to. I only go there for NC inspections. 2 yrs ago while there for inspection, they said sprocket recall came up to do. So I stayed extra to have done. They never said anything about a 24 hr cure. Maybe they didn't know or didn't care. I knew about it, but had to get back home to go to work, so I didn't get on the power band at all, just more easy on way home for 25 miles. So in the 2 yrs after, no problems with my 2015 RTL

Thank you and glad you have not had any problems with you 2015 RTL since the recall!

 

[Deanna777]

I have the same Spyder year and model as you @PURPLE ON THREE, and I haven't had any problems with the sprocket. I have not had any recalls on mine either.

Deanna