• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Frunk Lid Removal

MMMII

MMMII

New member
Tons of threads for frunk removal but I couldn't find anything about frunk lid removal.

Looks like one can remove the two 10mm bolts at the hinge and that should be it right?

I have a couple of chips from rocks that I want to touch up but to make the job easier I want to remove the lid.

Thanks!
 
:agree: It's an easy deal to manage...
You might just want to take your time with the re-installation so that the alignment is good! :thumbup:
 
You must log in or register to reply here.

Similar threads

M
How did I mess this up?!!! Removed the frunk to do some work, ran the Spyder with it off, & now have all sorts of warnings & Limp Home Mode!! Help?!
Replies
9
Views
930
Jetfixer
Jetfixer
Monk/Bob
RT Rear Trunk looks likely to wear where I press it to close it - is there anything to stop that?
Replies
16
Views
3K
rjinaz86323
rjinaz86323
Bridgid
Desperately seeking a way to save and keep my 2014 frunk lid when I trade the Spyder in - any suggestions?
Replies
7
Views
2K
JayBros
JayBros
J
Are there any good sources for Touch Up Paint for RT's?
Replies
5
Views
1K
jfischer
J
troop
Large left side inner panel removal assistance needed (Madison, WI area)
Replies
12
Views
2K
troop
troop
Back
Top